Screen Shot 2019-01-14 at 2.59.08 PM.png

Pail, Drum, Tote And Vessel Pumps

Request Information >


Orbetron Drum Metering Pumps are suitable for most precision metering of thin to thick viscosity products. Each system utilizes a gear metering pump which is force-fed by a special patented-design impeller, providing metering accuracy of ±1%. The impeller eliminates the possibility of cavitation in the metering pump. Orbetron Drum Pumps also prevent contamination of product by air, gas, and moisture. With a Orbetron drum pump, no feeder pump is necessary, eliminating costly additional equipment. The drum metering pump is highly accurate with or without additional controls. Complete metering systems are available with recirculation loop, flow meter readout, PLC controls, data logging, touch screen interfaces and mixing systems.

LV Design

  • Pump submerses to the bottom of the storage source

  • Viscosities from 1 to 50,000 cP

  • Quickly Flushable/Cleanable

  • Lightweight; optional lift stand available

  • Meters product from the bottom of container – almost no waste product remains

  • Sealed System at all times

  • Material Management Integration for proper product pre treatment (i.e., Nitrogen purge, desiccant dryers, etc.)

  • 5 gallon, 55 gallon, custom tote sizes and vessel compatible

HV Design

Metering pump is mounted to pressurized platen

Viscosities from 50,000 to 2,500,000 cP

Platen sits on the product surface riding down to the bottom of the barrel and can be heated

Rubber gasket on the outside of the platen completely cleans the sides of the container

Meters product to the bottom of the drum – very little waste product remains

5 gallon, 55 gallon,and custom drum sizes available(straight sided drum required)